Subaru Forester: Cruise control indicator light
This light illuminates when the “CRUISE” main switch is pressed.
If you press the main switch button while turning the ignition switch “ON”, the cruise control function is deactivated and the “CRUISE” indicator light flashes. To reactivate the cruise control function, turn the ignition switch back to the “Acc” or “LOCK” position, and then turn it again to the “ON” position.
High beam indicator light
This light shows that the headlights are in
the high beam mode.
This indicator light also illuminates when
the headlight flasher is operated. ...
Cruise control set indicator light
This light illuminates when vehicle speed
has been set. ...
See also:
Removing and installing rear head restraints
WARNING
Occupants should only travel sitting on seats which have the head restraints
installed. In the event of an accident, this reduces the risk of injury for passengers
seated in the rear ...
How To Use Remote Start
All of the following conditions must be met before the
engine will remote start:
• Shift lever in PARK.
• Doors closed.
• Hood closed.
• Liftgate closed.
• Hazard switch off.
...
Vehicles with manual transmission
Shift to either first gear or reverse gear R.
Turn the SmartKey to position 0 in the ignition lock and remove it. The
immobilizer is activated.
Apply the parking brake firmly.
...
