Nissan Rogue: Compatibility
The following models are available:
- Fifth generation iPod® (version 1.2.3 or
later)
- iPod Classic (version 1.1.1 or later)
- First generation iPod touch® (version 2.0.0
or later)
- Second generation iPod touch® (version
1.2.3 or later)
- First generation iPod nano (version 1.3.1 or
later)
- Second generation iPod nano® (version
1.1.3 or later)
- Third generation iPod nano® (version 1.1 or
later)
- Fourth generation iPod nano® (version 1.0.2
or later)
This unit may not control/operate correctly when
connected to some iPod versions/firmware and
iPhone.
Make sure that the iPod® version is updated.
Connecting iPod®
To connect an iPod® to the vehicle so that the
iPod® can be controlled with the audio system
controls and display screen, use the USB jack
located in the center console. Open the
protectiv ...
Audio main operation
Place the ignition switch in the ACC or ON
position. Then, push the button repeatedly
to switch to the iPod® mode.
If the system has been turned off while the iPod®
was playing, pushing the O ...
See also:
Useful information
This Operator's Manual describes all models and all standard and optional equipment
of your vehicle available at the time of publication of the Operator's Manual. Country-specific
diffe ...
Taking out the spare tire (vehicles without the spare tire cover)
Using the wheel nut wrench,
loosen the hold-down nuts by
turning them counterclockwise
until they can be loosened by
hand. Follow the order shown in
the illustration.
2 Remove all the wheel nu ...
Scan
This function plays the first ten seconds of
each track/audio file. To start scanning:
1. Press OK/MENU.
2. Turn TUNE to Scan.
> The first ten seconds of each track/
audio file will be playe ...
