Jeep Liberty: Compass Display / ECO (Fuel Saver Mode) — If Equipped
The compass readings indicate the direction the vehicle is facing. Press and release the COMPASS button to display one of eight compass headings, the outside temperature, and audio information (if the radio is on)/ECO if the EVIC display is not already displaying this screen.
NOTE: The system will display the last known outside temperature when starting the vehicle and may need to be driven several minutes before the updated temperature is displayed. Engine temperature can also affect the displayed temperature; therefore, temperature readings are not updated when the vehicle is not moving.
- ECO (Fuel Saver Mode) — If Equipped
- Automatic Compass Calibration
- Manual Compass Calibration
- Compass Variance
EVIC Main Menu
To step to each main menu feature press and release the
MENU button once for each step. A step from the last
item in the list will cause the first item in the feature list
to be displayed. The f ...
ECO (Fuel Saver Mode) — If Equipped
The ECO message will display below the outside temperature
in the EVIC display (if the audio system is on
the ECO indicator will override the audio information
display line) if the Display Fuel ...
See also:
Cigarette lighter
For the cigarette lighter to work, the key must
be in the "ACC" position or the "ON" position.
To use the cigarette lighter, push it all the way
into its socket. When the e ...
Low battery voltage
If the battery voltage is too low, the parking
brake cannot be applied or released. Connect
an auxiliary battery if the battery voltage is too
low, see page 114. ...
Activating/deactivating TPMS (Canadian models only)
1. Switch off the engine.
2. Put the ignition in mode I or II (see page
82 for additional information).
3. Press the MY CAR key in the center console
control panel and select Settings
Car se ...
