Toyota RAV4: Coast braking function - Cruise control - Using other driving systems - When driving - Toyota RAV4 Owner's ManualToyota RAV4: Coast braking function

●Holding the lever down to decrease the set speed activates the brake system automatically, decelerating the vehicle quickly. While the brake system is operating, the stop lights and high mounted stoplight will turn on.
●A sound may be heard from the engine compartment during the operation of the brake system. The sound means the brake system is operating and it does not indicate a malfunction.

    Cruise control can be set when
    ●The shift lever is in D or 3 (4-speed models), or D or 4 (5-speed models). ●Vehicle speed is above approximately 25 mph (40 km/h). ■Accelerating after setting the vehicle speed & ...

    Automatic cruise control cancelation
    Cruise control will stop maintaining the vehicle speed in any of the following situations. ●Actual vehicle speed falls more than approximately 10 mph (16 km/h) below the preset vehicle sp ...

    See also:

    Reporting safety defects in the U.S.
    If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTS ...

    Snow tires and cables
    WARNING: Snow tires must be the same size, load index, speed rating as those originally provided by Ford. Use of any tire or wheel not recommended by Ford can affect the safety and performance of ...

    Brow of hill
    When driving up an uphill gradient, slightly reduce pressure on the accelerator immediately before reaching the brow of the hill. Use the vehicle's own impetus to drive over the top of the hil ...