Nissan Rogue: Activating Around View Monitor
Selector lever operation:
- When the selector lever is shifted into the “R” (Reverse) position (1 ) while a screen other than the Around View Monitor A is displayed, Around View Monitor is activated and the rear view/bird’s-eye view screen B is displayed.
The screen B switches back to screenA when the selector lever is shifted out of the “R” (Reverse) position (2 ).
CAMERA button operation:
- When the CAMERA button is pushed (8 ) while a screen other than the Around View Monitor A is displayed, Around View Monitor is activated and the front view/ bird’s-eye view screen D is displayed.
How to switch the display
: Shift the selector/shift lever : Push the CAMERA button A : Original screen before the Around View Monitor is operated B : Rear view/bird-eye view screen C : Rear view/front-side view s ...Operations after activation
- When the rear view is displayed on the left side on the screen (B or C ), the view on the right side switches between the bird’seye view B and the front-side view C each time the CAMERA bu ...See also:
Limitations
Strong sunlight, reflections, extreme light contrasts,
the use of sunglasses, or if the driver is
not looking straight ahead may make the visual
warning signal in the windshield difficult to see ...
When “NO USB” is displayed (type D audio)
This message is displayed under the
following conditions.
- No USB storage devices/iPod® are
connected.
- A non-connectable USB storage device/
iPod® is connected.
Connect a connectable USB ...
Fuel selection
CAUTION:
● Your vehicle is designed to use only diesel fuel that meets the EN 590 standard.
Use of any other type of diesel fuel can adversely affect the engine. ...